Hardwood floors come in a wide variety of styles, patterns, and textures. The kind of restoration you choose to do will depend on the type of wood floor restoration you are attempting. There are basically two kinds of hardwood restoration: wood floor sanding and oil floor restoration. Each has its own advantages and disadvantages.

Wood floor restoration using sanding involves removing the top coat of the wood, which leaves the wood with a worn or unfinished look. This kind of restoration can be done using either drum sander or a machine-a-plenty. To begin, you need to take all the flooring from the room and place it in a drum sander (which is the best), a floor buffer (which is the cheapest) or an air compressor. Next, use a high-pressure air stream to completely sand the floors.

Oil floor restoration, on the other hand, involves cleaning up the dirt, dust and grease that are ground into the wood during wood floor restoration. To do this, you need a shop vacuum and a shop brush. You can also use a floor buffer. It’s important to have a shop vac or an air compressor in your garage to do this kind of restoration. As for the brushes, you should use an oil based, fine-grit one to prevent ruining the finish.

If your floor already looks scratched, you may opt to go with sanding instead. The main difference between sanding and cleaning is that with sanding, you just have to do the work yourself. All you need is a power sander and sandpaper to remove the scratches and stains. Plus, you don’t have to pay for professional sanding services since you can just buy cheap sanding pads at your local floor restoration company.

Before you start sanding off the scratch, consider a few factors first. Is the wood affected by pests? If so, you should only use a non-toxic, biodegradable stain remover. Insects love wood floors, so you may want to consider putting netting over the entire floor after sanding. You can use plastic bags to tightly seal the sanded area to protect your floor.

After sanding, use an anti-static agent to completely get rid of any static charges built up over time. This will make your restoration process faster and less tedious. If the floor is new, you may want to consider applying floor restoration treatments. In fact, this shouldn’t be a total of your restoration chores. Some of these include using floor polishes and wax to bring back a classic shine to the floor. For more details on floor restoration visit www.northhoustonwoodrefinishing.com.